GRAPHTEC CUTTING PRO FC2250 Series User Manual page 76

5
CHAPTER
FUNCTION SETTINGS AND OPERATIONS
PRODUCT SUMMARY
5.1 PAUSE Menu Configuration
5.2 Clearing the Buffer
5.3 Raising/Lowering the Tool
5.4 Moving the Pen Carriage to the Upper Right Position
5.5 Setting the Communication Conditions
5.6 Setting the Data Format to be Received
5.7 Assigning THICK Mode
5.8 Setting the Overlay Function
5.9 Assigning Tool Numbers
5.10 Assigning Perforation Cutting
5.11 Setting the Tool Interval Adjustment Value
5.12 Setting the Distance Adjustment Values
5.13 Sorting
5.14 Rotating the Coordinate Axes
5.15 Setting the Cutting/Plotting Area
5.16 Setting the Mirror Mode
5.17 Scaling the Image Data
5.18 Setting the Initial Cutting Force
5.19 Setting the Offset Force
5.20 Setting the Offset Angle
5.21 Setting the Step Pass
5.22 Setting the Tool Movement Speed
5.23 Setting the Pen Carriage Movement Speed
5.24 Printing a Conditions List
5.25 Printing the Self-Test Pattern
5.26 Printing a Character Dump List
5.27 Special Functions