Introduction; About Datatrack; About Datatrack Backbone - ETC DataTrack Planning And Installation Manual

Introduction

About DataTrack

The DataTrack System from ETC is a professional-grade track system that offers built-in
DMX/RDM wiring and two separate power circuits that can be independently switched or
dimmed. DataTrack can be used for hybrid systems using both conventional and LED fixtures.
DataTrack easily blends into its surroundings, providing power and data reliably and
discretely. It's the solution for a variety of permanent applications, including art galleries,
museums, retail displays, lobbies, comedy clubs, nightclubs, and venues with low ceilings or
the need to feed power and data to track-mounted luminaires.
The DataTrack System includes an extensive selection of adapters, feeds, end caps, couplers,
hanging accessories, and other accessories to fit most any installation requirements.
DataTrack offers:
• Two-circuit track with separate neutrals
• Up to 32 DMX devices per data run
• Up to 20 RDM devices per data run
• Suspended or surface mounting (recessed mounting also available; contact your local ETC
representative for more information)
• 3-amp, 5-amp, 8-amp, and 12-amp current-limiting breakers located directly at the track
• Up to 22 pounds per foot (30 kilograms per meter) of load capacity when properly supported
• Two-year warranty
• White, black powder-coated, and silver anodized finishes
• 4 ft, 8 ft, and 12 ft (1.21 m, 2.43 m, and 3.65 m) sections that can be field-cut to custom lengths
as required
• Easy surface mounting using pre-punched holes positioned every 8 in (20.32 cm) in the track
(self-tapping screws can be used in places where there are no pre-punched holes)

About DataTrack Backbone

DataTrack Backbone provides a robust track solution when larger fixtures are required. With
DataTrack Backbone, an aluminum housing encloses DataTrack system hardware, providing
additional strength and more robust structural attachment. A steel fixture hanger combined
with a pigtail adapter allows you to use larger, theatrical lighting fixtures in addition to
traditional track fixtures with DataTrack.
In addition to the DataTrack features described above, DataTrack Backbone offers:
• Suspended mounting
• Increased maximum suspension point distance to 10 ft (3 m)
• Increased load capacity to 250 lb (127 kg) over 10 ft (3 m); see
page 8
• White powder-coated, black anodized, and silver anodized finishes
Introduction
for load capacity details
Suspended Load Capacity
on
1