Introduction - ETC Source 4WRD Color Installation And User Manual

Introduction

The Source 4WRD Color is a replacement for a standard Source Four
burner assembly. It converts the HPL source to an RGBA (red, green, blue,
and amber) LED and provides a significant reduction in power
consumption. The Source 4WRD Color uses DMX dimming and requires
power from a non-dimmable source. When not using DMX, you can use
any of the 12 presets or 5 sequences on the Source 4WRD Color.
The Source 4WRD Color can also be used with the Source 4WRD PAR or
PARNel Fixture Body to create a Source 4WRD Color PAR or PARNel
fixture. For best results, we recommend that you use the included
diffusion on the Source 4WRD PAR or PARNel Fixture Body when paired
with the Source 4WRD Color. For more information, see the Source 4WRD
Color PAR and PARNel datasheet at etcconnect.com.
Note:
Source Four LED, Fresnel, PAR, PARNel, or jr fixtures.
Source 4WRD Color Installation and User Manual
The Source 4WRD Color retrofit kit is not compatible with
Retrofit kit,
shown installed
on a Source Four
fixture body
1