1. Manuals
  2. Brands
  3. ETC Manuals
  4. Light Fixture
  5. Desire series
  6. User manual

ETC Desire series User Manual

Hide thumbs Also See for Desire series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Manual
®
Desire
Series by ETC
D22, D40, D40XT, D60, D60X
User Manual
v1.8.0
Rev B
The Desire series of fixtures are intended for professional use only.
Read entire User Manual before using equipment.
This product is intended for professional use only.
Read this entire document before using this product.
Copyright © 2015 Electronic Theatre Controls, Inc.
All rights reserved. Product information and specifications subject to change.
Part Number: 7410M1200-1.8.0
Released: November 2015

Advertisement

Table of Contents
loading

Related Manuals for ETC Desire series

Summary of Contents for ETC Desire series

  • Page 1 D22, D40, D40XT, D60, D60X User Manual v1.8.0 Rev B The Desire series of fixtures are intended for professional use only. Read entire User Manual before using equipment. This product is intended for professional use only. Read this entire document before using this product.

  • Page 2: Quick Setups

    Introduction Congratulations on your purchase of a Desire Series by ETC product. Desire’s x7 Color System™ seven-hue technology produces a light and color quality that conventional LED systems cannot duplicate. This unique color system produces bright, broad- spectrum whites and intense colors equally well, rendering pigments, objects, and skin tones in a natural way.
  • Page 3 Status indicators Keypad Figure-1.2 Components of the Rear Panel. D40 and D60 shown. Back Light Bulb Enter Home Down Figure-1.3 Keypad Button Functions. User Interface Overview page For more information about the user interface, see Desire Series v1.8.0 User Manual...

  • Page 4: Quick Start

    W A R N I N G : • Do not link more than nine fixtures when using Power Thru (non-dimming, 100 to 240 VAC, 50/60 Hz). Power Thru is not available on all Desire Series fixtures. • Up to 32 devices can be daisy-chained together per data run.

  • Page 5: Quick Setups Menu

    Quick Color (Vivid, Lustr+, Fire and Ice, Studio HD) When there is no DMX signal to the fixture: Quick Color allows you to easily select a color and its intensity from a predefined menu. This feature overrides any presets or sequences previously selected and is only available when colors,See “Presets (Vivid, there is no external DMX signal to the fixture.
  • Page 6 Standard dimming curve, Single Direct regulated output for color For general purpose architectural use Channel consistency Incandescent dimming curve, Matches conventional luminaire Stage Direct regulated output performance Desire Series v1.8.0 User Manual...

  • Page 7: Specifications

    (Vivid, Lustr+, Fire and Ice, Studio HD) options including round, oblong, and linear patterns • Tight primary field angle of 24° • Slots for secondary lenses (Studio Daylight and Studio Tungsten) • Combine linear lenses for desired beam spread Desire Series v1.8.0 User Manual...
  • Page 8 Color • Specialized capabilities from different LED array options • Interacts seamlessly with conventional sources based on x7 color-mixing expertise: • Achieves excellent 3200° or any other Correlated Color – Vivid – Optimized for strong, saturated colors at Temperature white light from 2000 to 10,000°K (except maximum brightness Fire or Ice) (CCT adjustment not available on Studio –...

  • Page 9: Typical Power Consumption (D40 And D40Xt)

    Typical Power Consumption (D40 and D40XT) Vivid 100V 120V 240V Idle Power / Current 10.5W / 0.135A 11W / 0.098A 12.7W / 0.078A 100% Boost Power / Current 102W / 1.12A 98W / 0.82A 95.6W / 0.403 Lustr+ 100V 120V 240V Idle Power / Current 10.3W / 0.125A...

  • Page 10: Note About Led Fixtures

    All LED sources experience some lessening of light output and some color shift over time. Desire Series fixtures have complex thermal management systems to minimize these changes. With typical usage, a Desire fixture will still achieve at least 70% of its initial output after 50,000 hours of use (B50, L70).

  • Page 11: Color Rendering Index And Color Quality Scale Ratings

    Color Rendering Index and Color Quality Scale Ratings Desire fixtures are evaluated for Color Rendering Index (CRI) and Color Quality Scale (CQS) performance using measured output spectrum and optimized mix solutions for a best spectral match to black body sources at 3200K and 5600K. Color fidelity was also measured. These numbers may fluctuate slightly from fixture to fixture.

  • Page 12: Installation

    Step 4: Insert the yoke locking knob and flat washer and tighten. Installing D22 Canopy and Track For detailed installation information, reference the Desire Series D22 Installation Guide. ETC manuals are available for download at http://www.etcconnect.com/downloads.aspx. Desire Series v1.8.0 User Manual...

  • Page 13: Aim Adjustment

    Aim Adjustment D40, D40XT, D60, D60X, D22 Portable The fixture can be tilted up and down and rotated (panned) to aim the light where it is needed. The adjustment is the same for the yoke or floor stand. To assist aiming the fixture, you can turn it on without having to be connected to DMX control or enabling a preset.

  • Page 14: D22 Canopy And Track

    LED life is adversely affected by high-temperature operation. When operating under elevated ambient temperatures, avoid turning all channels to 100% for extended periods, such as channel checks or focusing. Desire Series v1.8.0 User Manual...

  • Page 15: Dimensions And Hanging Clearances

    Dimensions and Hanging Clearances Use the following dimensions to allow proper clearances around the fixture. Allow additional space for cables. 10.4” 11.7” 105mm 294.6mm 6.1” 3.3” 8.9” 105mm 82.8mm 227.3mm 3.1” 77.5mm 4.3” 109.7mm 6.3” 160.5mm 8.2” 6.6” 207.5mm 166.6mm 7.7”...

  • Page 16: Safety Cable

    Total weight depends on how the individual fixture is configured. Model Shipping Weight Weight Lbs. Lbs. D22 Portable D22 Canopy D22 Track 14.4 19.3 D40XT 16.5 21.4 20.2 11.3 D60X 21.5 24.7 11.2 a) Does not include mounting hardware. Desire Series v1.8.0 User Manual...

  • Page 17: Power And Data Cabling Requirements

    Power and Data Cabling Requirements Power The Desire series fixture operates on AC power, 100 to 240VAC/50-60Hz. The fixture must be connected to a non-dimmable power source in order to avoid damage to its internal power supply and other electrical components.
  • Page 18 Connections All connections and user controls are located on the back of the fixture, depending on the model. This section does not apply to the D60X fixture as there is no rear display. Power In DMX In Power Thru DMX Thru Indicator lights Figure-1.6 Power and DMX connections on the back of the D40 or D60 Fixture.

  • Page 19: D22 Portable Dmx/Rdm Connections

    Connect the DMX cable: Align and connect the DMX connectors, pushing firmly until the locking tabs are fully activated. Disconnect the DMX cable: Press the release button on the connectors and pull the connectors apart. Desire Series v1.8.0 User Manual...

  • Page 20: Indicator Lights

    ON position to terminate the last fixture. All others on the DMX/RDM line must be set to OFF. • Track Mount – Terminate with a DataTrack DMX Term Block, ETC Part # 7066A1030 installed at end of the track. D40 and D60 model fixtures are self-terminating.
  • Page 21 Fixture address + 5 Color 6 Fixture address + 6 Color 7 Overall intensity 0 to Fixture address + 7 Intensity 100% Fixture address + 8 Strobe Variable strobe control a) See Color Mixes page Desire Series v1.8.0 User Manual...
  • Page 22 Color Mixes The following table shows the color mixes for each fixture type. Color Fire Lustr+ Vivid Studio HD Red-orange — White Red-orange Amber Amber — Amber Amber Green-cyan Green Green Green Green Blue — Cyan Cyan Cyan Warm white —...
  • Page 23 Studio is the default mode for Studio HD fixtures. The Studio profile is also available on all Studio Settings page 84. Also see other Desire Series fixtures. For more information, see Color Matching page Data Channel Control...

  • Page 24: Color Matching

    Plus 7 Plus 7 adds precision color-control channels to the HSI, HSIC, RGB, and Studio profiles. For example, HSI with Plus 7 enabled becomes a 14-channel profile. Placing channel 7 at a value over 51% activates the 14-channel profile within the fixture. The desired color and intensity is achieved by using the HSI or RGB channels as a starting point.

  • Page 25: Dmx Footprints And Channel Mapping

    DMX Footprints and Channel Mapping D22, D40, D40XT, D60 and D60X (Studio Tungsten and Daylight) Channel Control Intensity Strobe Fan control D22 (Lustr+ and Studio HD) Channel HSIC Studio Direct Intensity Color 1 Hue fine Hue fine Green Color temp Color 2 Saturation Saturation...
  • Page 26 DMX signal to the fixture. For a list of available colors, see the table on page 65. For additional information on Quick Color setup, See “Quick Color (Vivid, Lustr+, Fire and Ice, Studio HD)” on page 75. Desire Series v1.8.0 User Manual...

  • Page 27: Dmx Profile Tables

    DMX Profile Tables D40, D40XT – Vivid, Lustr+, Fire, Ice, Studio HD; D22 – Lustr+, Studio HD Channel Assignments Notes Profile Channels Vivid, Lustr+ Studio HD 1 - Red 1 - Red 2 - Orange 2 - Orange (White if Lustr+) 3 - Amber 3 - Amber Direct control of each individual color with a...
  • Page 28 12 - Cyan color output. 13 - Blue 14- Indigo Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly as the Strobe strobe-channel value approaches 100%. Desire Series v1.8.0 User Manual...
  • Page 29 Color calibration of LEDs is not active in this 2 - Strobe Studio mode. The ten-channel profile will produce the highest quality 3 - Fan Control color cross fades. (D60 only) 1-Intensity Direct 2-Strobe 3-Fan Control (D60 and D60X) Desire Series v1.8.0 User Manual...

  • Page 30: Installing Accessories

    Note: For D40 and D40XT, use only secondary lenses or accessories with a 7.5 inch mounting flange. To order glass lenses from ETC, contact your local dealer. D40 glass lens: ETC part #7410M4001 D60 glass lens: ETC part #7410A4003 Installation and User Interface...

  • Page 31: User Interface Overview

    User Interface Overview The Desire Series user interface (UI) consists of an LCD and keypad. All of the basic information is displayed on the LCD and the keypad is used to navigate through the menus. Use the LCD and keypad to program the fixture for your specific application.

  • Page 32: Keypad Lockout

    Keypad Use the keypad buttons to access and navigate the menus on the LCD. Figure-2.2 Keypad Buttons. Home Opens the home screen. Back Cancels the current operation and returns to the previous screen. Multiple presses of the back button will eventually take you to the status display.

  • Page 33: Status Indicators

    Vivid, Lustr+, Fire and Ice, Studio HD screen shown. Press [ ] or [ ] to highlight a menu item. Press [ ] to select the item. The asterisk (*) indicates that the item is currently active. Desire Series v1.8.0 User Manual...

  • Page 34: Status (Home) Screens

    Status (Home) Screens The status (home) screens display when you press [ ] or when there is no activity for a specific time. The home screens display the status of multiple fixture settings. These may or may not include: • Quick Setup •...

  • Page 35: System Message Area

    (:) and a value. The keypad is used to edit specific objects on the operation menu, such as DMX address, Preset and Sequence numbers, fade and delay times, etc. Once an edit has been made, press ] to accept the selection.

  • Page 36: Home Screen Displays

    Dimming curve is the way that the fixture responds to changes in the control signal for overall Curve page 61 intensity. For more information, see Red Shift Red shift replicates the warming of an incandescent filament’s color temperature change as it Red Shift page dims. For more information, see Desire Series v1.8.0 User Manual...

  • Page 37: Dmx Start Address

    Strobe Strobe page Strobe flashes the output of the LED array. For more information, see Fan Control (D60) The fan on D60 fixtures can be forced on via DMX control or by adjusting settings under the Fan Control (D60) page Advanced Settings menu.

  • Page 38: Advanced Settings

    The Advanced Menu provides access to various fixture settings and specific operations. The Advanced Menu is accessed from the Main Menu by pressing [ ] or [ ] to select Advanced Settings and then pressing [ Desire Series v1.8.0 User Manual...

  • Page 39: Dmx Settings

    DMX Settings The current DMX settings are shown in the DMX Settings screen. Use the DMX Settings screen to customize the following: • DMX start address • DMX profile • Strobe • Data loss • Plus Seven (Vivid, Lustr+, Fire and Ice, Studio HD) The two lower lines of the DMX Settings screen display the number of DMX channels used by the fixture, according to the options selected, and their arrangement, in order.

  • Page 40: Dmx Profile

    6 chan 5/15 Strobe Figure-3.6 Enabling Strobe on the DMX Settings Menu. Step 2: Press [ ] to toggle between On and Off. Step 3: Press [ ] or [ ] to commit the option. Desire Series v1.8.0 User Manual...
  • Page 41 Fan Control (D60 only) Fan Control adds another DMX channel of control when set to DMX. Alternate settings are Fan Control (D60) page Slow, Fast, and Automatic. For more information, see Step 1: On the DMX Settings menu, scroll to Fan. DMX Settings DMX Start Address: DMX Profile:...
  • Page 42 Plus 7 channels are moved down from the starting point. • The starting point on the Plus 7 color channels is 50% control level. If all the Plus Seven color adjust channels are at 50%, the colors are at the original colors. Desire Series v1.8.0 User Manual...

  • Page 43: Led Settings

    Once any one of the seven individual color channels is altered from its neutral starting Note: position, the settings for the original color point may no longer reflect the actual output of the fixture. When using RGB, HSI, HSIC, or Studio profile for color selection, each fixture makes accommodations for the specific LEDs in its array and produces output that is consistent with other fixtures, whether or not they use LEDs from the same production batch.
  • Page 44 If the fixture exceeds its maximum internal temperature, the fixture enters a cool- down state, stops responding to the control signal, and it shuts down most or all power to the LED array and displays its over-temperature status according to its setting for over-temperature warning. Desire Series v1.8.0 User Manual...
  • Page 45 Curve The dimming curve, commonly called curve, is the correlation between the change in the value of the dimming control signal and the actual change in the fixture's brightness. Curve is also the extent to which the fixture lags in its response time to the control signal in order to facilitate smoothness in dimming.
  • Page 46 White Point: 3200K Figure-3.11 Selecting Curve on the LED Settings Menu. Step 2: With Curve selected, press [ ] to toggle between the options. Step 3: Press [ ] or [ ] to commit the option. Desire Series v1.8.0 User Manual...

  • Page 47: Red Shift

    Output Freq Output Frequency is the frequency in Hz at which the LED array pulses, or blinks, as a function of Pulse-Width Modulation (PWM). The frequency is adjustable in order to avoid visible flicker on video and film. When altering the frequency in order to reduce noticeable flicker on camera, often only a small change is required.

  • Page 48: Presets & Sequences

    From the Advanced Menu select Presets and Sequences or press [ Step 2: With Focus selected, press [ ] to turn the fixture On. Step 3: When finished, press [ ] to turn the fixture Off. Desire Series v1.8.0 User Manual...

  • Page 49: Local Settings

    Restore Defaults Figure-3.39 Selecting Local Settings on the Advanced Menu. Step 1: On the Advanced Menu, scroll to Local Settings. Step 2: Press [ Step 3: Scroll to any of the menu choices and press [ Desire Series v1.8.0 User Manual...
  • Page 50 Backlight You can change the brightness of the LCD backlight. The brightness level is 10 to 100%. The default is 100%. Step 1: With Backlight selected, press [ ]to select the value. Step 2: Press [ ] or [ ] to set the desired brightness percentage. The effect can be seen as you make the adjustment.
  • Page 51 The fixture produces a low-level light from only some of the LEDs in the LED array, displays a warning message on the LCD, turns on the LCD backlight, and turns on the error indicator light. Desire Series v1.8.0 User Manual...
  • Page 52 Dark The fixture turns off the LED array entirely and displays a warning message on the LCD without turning on the LCD backlight. Step 1: With OverTemp selected, press [ Local Settings Backlight: 100% BLght time out: 1 min Language: English Status Indicators: OverTemp:...

  • Page 53: Error Messages

    LED Ambient Low conditions. Fixture does not have its color information loaded. This error Color System Fail may represent a hardware failure. Contact ETC Technical Services. LED Over Temp A specific LED is too hot and the fixture has been shut down.

  • Page 54: Software Updates

    ETC Technical Support Any time, any day–15 minute response time—that’s our service commitment. ETC’s Technical Service is unparalleled in the industry. With over 60 service employees worldwide, not to mention our extensive Authorized Service Center network, we are uniquely positioned to be able to help you anywhere, anytime.

  • Page 55: Routine Maintenance

    Routine Maintenance To ensure optimum performance of your Desire series fixture, you should perform the following inspections and cleaning at least once a year. You may need to inspect or clean the fixture more often, depending on the type and amount of use your fixture experiences during the year.

  • Page 56: Menu Flow Chart

    Appendix A Menu Flow Chart The following illustrations show each of the menus that are displayed on the Desire fixture LCD and the path to each one. This menu does not apply to the D60X fixture. Home and Main Menus (Vivid, Lustr+, Fire and Ice, Studio HD) HSI Reg Stnd ––...
  • Page 57 Main Menu DMX Start Address: Quick Setups Advanced Settings Main Menu DMX Start Address: *Studio Quick Setups Stage Advanced Settings Single Channel 1/3 Intensity Main Menu DMX Start Address: Quick Setups To Advanced Advanced Settings Menu Desire Series v1.8.0 User Manual...
  • Page 58 Advanced Menu (Vivid, Lustr+, Fire and Ice, Studio HD) Main Menu DMX Start Address: Quick Setups Advanced Settings DMX Settings Advanced Menu DMX Settings DMX Start Address: LED Settings DMX Profile: HSIC Presets and Sequences Strobe: Enabled Diagnostics Data Loss: Instant Local Settings Plus Seven:...
  • Page 59 Presets (Vivid, Lustr+, Fire and Ice, Studio HD) Presets Copy All Settings appears only Preset: * 23 when DMX is not present. Status: Active Fade Time: 00:02 Delay Time: 00:00 Edit Advanced Menu Copy to Other Fixture DMX Settings LED Settings Presets and Sequences Diagnostics Presets...
  • Page 60 Sequences and Quick Color Menus (Vivid, Lustr+, Fire and Ice, Studio HD) Presets and Sequences Presets and Sequences Focus: Focus: Presets Presets Sequences Sequences Quick Color Quick Color Preset 1 is Active Preset 1 is Active No Sequence is Active No Sequence is Active Press the Light Bulb button Sequences...

  • Page 61: Diagnostics Menu

    To Recalibrate Test Fixture Recalibrate Fixture About Fixture Diagnostics About Fixture Current DMX In DMX START: 001 Network Statistics Ver: 1.4.1.0.0.20 (1) Test Ser: 000021xxx Recalibrate Fixture RDM: 6574:12345678 About Fixture Desire Vivid 22 RDM Label Desire Series v1.8.0 User Manual...

  • Page 62: Diagnostics Test

    Diagnostics Test Advanced Menu DMX Settings LED Settings Presets and Sequences Diagnostics Local Settings Diagnostics Diagnostics Current DMX In Test Action: Chase Network Statistics Chase: 15 steps/sec Test Individual Control Recalibrate Fixture About Fixture Diagnostics Test Action: Chase Chase: 15 steps/sec Individual Control Diagnostics Test...

  • Page 63: Diagnostics Recalibrate Fixture

    This Will Calibrate Test LED Array Recalibrate Fixture About Fixture Are You Sure? LED Calibration LED 1 ..Pass LED 2 ..Pass LED 3 ..Pass LED 4 ..Working LED 5 ..Working LED 6 ..Working LED 7 ..Working Desire Series v1.8.0 User Manual...

  • Page 64: Rdm Commands

    Appendix B RDM Commands The following table lists the RDM commands applicable to the D60X fixture. Parameter Feature Queued RDM Parameter ID Enumerations Values Status Messages Yes E120_STATUS_MESSAGES — — Supported See RDM E120_SUPPORTED_PARAMETERS — Parameters E1.20-2006 Parameter See RDM E120_PARAMETER_DESCRIPTION —...
  • Page 65 “0, 1, 2, 3, 4, E120_ETC_SIMPLESETUPMODE_DESCRIPTION — Description 5" Over Temp E120_ETC_OVERTEMPMODE_DESCRIPTION “0, 1" — Description Prepare For E120_ETC_PREPAREFORSOFTWAREDOWNLOA Software — — Download Get requested 0 = 0.0 32767 = CIE 1931 (x,y) E120_ETC_LED_REQUESTED_XY 0 to 32767 coordinate Desire Series v1.8.0 User Manual...
  • Page 66 0 = 0.0 32767 = 1931 (x,y) E120_ETC_LED_CURRENT_XY 0 to 32767 coordinate Get current E120_ETC_LED_CURRENT_PWM 0 to 32767 — PWM duty cycle Get LED CIE See ETC Manf Tristimulus E120_ETC_LED_TRISTIMULUS — RDM doc values Get LED See ETC Manf E120_ETC_LED_INFORMATION — information...

This manual is also suitable for:

Desire d40Desire d40xtDesire d60Desire d60xDesire d22

Table of Contents