Options And Accessories - Intelligent Motion Systems MDrive17Plus Hardware Reference Manual

1-16

Options and Accessories

Control Knob
The MDrive17Plus
shaft positioning.
Planetary Gearbox
Efficient, low maintenance Planetary Gearboxes are offered assembled with the MDrive17Plus 2
(For specifications and details see Appendix C: MDrive17Plus Planetary Gearbox Specification.)
Encoder
The MDrive17Plus
with index mark.
Remote Encoder
The MDrive17Plus
mounted encoder (not supplied).
Linear Slide
Integrated linear slides are available factory installed for precision linear movement. Screw pitches
are 0.1", 0.2", 0.5" or 1.0" of travel per rev. Slides are 10.0" (25.4cm) to 36.0" (91.44cm) long.
Contact factory for custom lengths.
Communication Converter Cables
These convenient 12.0' (3.6m) accessory cables connect a PC's USB Port to the MDrive17Plus
P2 Connector. An in-line RS-422 converter enables parameter setting to a single MDrive17Plus
Motion Control. Cable purchase recommended with first orders. Versions include:
USB to 10-Pin IDC ................................................................ Part No. MD-CC400-000
10-Pin IDC to Wire Crimp Adapter .............................................. Part No. MD-ADP-H
Prototype Development Cable
To speed prototyping of Plus
with first orders:
16-pin Wire Crimp Cable ........................................................ Part No. PD16-1417-FL3
Motion Control is available with a factory-mounted rear control knob for manual
2
Motion Control is available with an internal 512-line (2048 count) magnetic encoder
2
Motion Control is available with differential encoder inputs for use with a remotely
2
2 versions, IMS recommends the following 10' (3m) interface cable
MDI Hardware Manual Revision R052506
2
2