Automatically Discover Panels; Manually Add Panels - Extron electronics TouchLink User Manual

Automatically Discover Panels

Automatically discover panels that are on the same subnet as the computer running the
Room Agent software as follows:
NOTE: Any panels not on the same subnet as the computer running Room Agent must
be added using the Manually Add Panels pane (see "Manually Add Panels").
1. If Panel Management view is not currently displayed, click the Panel Management tab.
Click the Discover button above the Auto Discovered Panels pane (see
2.
on the previous page).
1
The Discover button becomes the Stop Discovery button. Panels that are located
on the same subnet are automatically discovered and displayed (see figure 11).
1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 11.
NOTES:
•
•
•
3.
When all of the panels are displayed, click the Stop Discovery button to end the
search (see figure 11,

Manually Add Panels

Manually add panels that are on a different subnet than the computer running the Room
Agent software as follows:
1. If Panel Management view is not currently displayed, click the Panel Management tab.
Click the Add New button above the Manually Added Panels pane (see
2.
The Add New Panel dialog box opens (see figure 12).
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 12.
Enter the IP address of the desired panel in the IP Address/Hostname: field
3.
(see
figure 12
Auto Discovered Panels Pane
TLS scheduling panels ship with scheduling firmware installed. Extron
recommends using firmware version 1.12.0001.b001 or higher.
TLP Pro touchpanels ship with control firmware installed. Room Agent
requires that scheduling panels run different, scheduling, firmware, version
2.03.0000-b001 or higher to connect to them.
For either family of panel models, if you receive the message Cannot
, click OK in the message dialog box, STOP
connect to this device
HERE and update the panel firmware (see
page 37, beginning at step 5).
).
1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Add New Panel Dialog Box
, on the previous page).
1
Room Scheduling System • Room Agent Installation and Configuration
figure 10
on
Update Firmware
figure 10
,
, ).
2
17