Automatically Discover Panels; Manually Add Panels - Extron electronics TLS 520M User Manual

Automatically Discover Panels

Automatically discover panels that are on the same subnet as the computer running the
Room Agent software as follows:
NOTE: Any panels not on the same subnet as the computer running Room Agent must
be added using the
1. If Panel Management view is not currently displayed, click the
2. Click the
on the previous page).
1
The Discover button becomes the Stop Discovery button. Panels that are located
on the same subnet are automatically discovered and displayed (see figure 11).
1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 11.
NOTES:
•
•
•
3.
When all of the panels are displayed, click the
search (see figure 11,

Manually Add Panels

Manually add panels that are on a different subnet than the computer running the Room
Agent software as follows:
1. If Panel Management view is not currently displayed, click the
2. Click the
The
Add New Panel
1 1 1 1 1 1 1 1 1 1
Figure 12.
Add Panels pane (see "Manually Add Panels").
Manually
button above the
Discover
Auto Discovered Panels Pane
TLS scheduling panels ship with scheduling firmware installed. All except the
TLS 525M, TLS 725M, or TLS 1025M require firmware version 2.01.0010-b001
or higher to connect to them. TLS 525M, TLS 725M, or TLS 1025M requires
version 1.00.0004-b001.
TLP Pro touchpanels ship with control firmware installed. Room Agent
requires that scheduling panels run different, scheduling, firmware, version
2.01.0010-b001 or higher to connect to them.
For either family of panel models, if you receive the message
, click
connect to this device
and update the panel firmware (see
at step 5).
).
1
button above the
Add New
dialog box opens (see figure 12).
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
Add New Panel Dialog Box
Room Scheduling System • Room Agent Installation and Configuration
Panel Management
Auto Discovered Panels
in the message dialog box, STOP HERE
OK
Update Firmware
Stop Discovery
Panel Management
pane (see
Manually Added Panels
tab.
pane (see figure 10,
Cannot
on page 46, beginning
button to end the
tab.
figure 10, ).
2
16