Panel Management Tab - Extron electronics TouchLink User Manual

Panel Management Tab

Connect to the panel
Each panel requires setup as follows:
1. Click the Setup button for the panel to be set up.
NOTE: The
The Panel Connection dialog box opens (see figure 14).
Figure 14.
If applicable, enter a password in Password block (see figure 14,
2.
NOTES:
•
•
3. Click the Connect button (
The Room Agent connects to and synchronizes with the panel. Once synced, Room
Agent displays the Device Management window with either the Communication
Settings tab (see
figure 16
button deletes a panel from the list.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Panel Connection Dialog Box
The factory configured passwords for all accounts on this device have been set
to the device serial number. Passwords are case sensitive.
If the device is reset to default settings, the password will be the default
password configuration. The default password is extron.
).
2
on the next page) or General Settings tab (see
figure 15
on page 21) selected.
Room Scheduling System • Room Agent Installation and Configuration
).
1
19