Extron electronics TouchLink User Manual page 24

If the panel is password protected, enter the password in the Password: field
4.
( ).
2
NOTES:
• The factory configured passwords for all accounts on this device have been set
to the device serial number. Passwords are case sensitive.
• If the device is reset to default settings, the password is the default password
configuration. The default password is extron.
5. Click the Add button (
3
adds it to the Manually Added Panels pane (see figure 13).
NOTES:
• TLS scheduling panels ship with scheduling firmware installed. Extron
recommends using firmware version 1.12.0001.b001 or higher.
• TLP Pro touchpanels ship with control firmware installed. Room Agent
requires that scheduling panels run different, scheduling, firmware, version
2.03.0000-b001 or higher to connect to them.
• For either family of panel models, if you receive the message Cannot
connect to this device
HERE and update the panel firmware (see
page 37, beginning at step 5).
Figure 13. Panel Management View with Panels Assigned
Room Scheduling System • Room Agent Installation and Configuration
). Room Agent searches for the requested panel and, if found,
, click OK in the message dialog box, STOP
Update Firmware on
18