Assigning A Service Account - Extron electronics TouchLink User Manual

Assigning a Service Account

1.
2.
3.
4.
5.
6.
7.
If necessary, click the Assign Service Account tab (
1 1 1 1 1 1 1 1 1 1 1 1 1 1
4 4 4 4 4 4 4 4 4 4 4 4 4 4
3 3 3 3 3 3 3 3 3 3 3 3 3 3
2 2 2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5 5 5
Figure 73. Service Account Manager — Assign Service Account
Select one or more panel IP Address checkboxes (
Select check box at the top of either the Auto Discovered Panels (
TIP:
Manually Entered Panels to select all panels in that pane.
Select the desired service account among the entries in the Service Account drop-
down list ( ).
4
Click Assign ( ).
5
The selected service account is assigned to the designated panels (
Repeat steps 2 through 4 to assign other service accounts to other panels.
Click Close ( ).
7
The Service Account Manager dialog box closes and the Room Agent software
returns with the Panel Configuration tab displayed.
In the Room Resouce Account column of each touchpanel, enter the email address
used as the fully-qualified room resource.
Room Scheduling System • Microsoft Extchange Setup
).
1
6 6 6 6 6 6 6 6 6 6 6 6 6 6
7 7 7 7 7 7 7 7 7 7 7 7 7 7
).
2
3
).
6
) or
65