Rendezvous By Nfs Setup; Calendar Setup; Panel Setup - Extron electronics TouchLink User Manual

Rendezvous by NFS
Setup

Calendar Setup

Figure 97.
1.
2.
3.

Panel Setup

The following column headings are available for touchpanels with the Rendezvous by NFS
calendar:
•
•
•
•
•
Selecting the Rendezvous by NFS Calendar
Select NFS from the Select a Calendar Type drop-down list (see figure 97,
Select a protocol (either https:// or http://).
If you use https:// the Proxy Server must be setup as "TLS Pass Through". This is
required for the TLS to validate the calendar server's SSL certificate (see
Proxy Server on page 82).
Enter the address of the NFS server.
Status — Use this check box to select individual panels for configuration.
IP Address — This cell contains the IP address of the touchlink panel.
Hostname — The host name is a fully qualified domain name that uniquely identifies
the computer. It is required for the computer to communicate with other devices on the
network.
Room Name — This is the name that appears on the touchscreen, once it is
configured.
User Name — this is the user name for an account with access to the NFS server. It is
typically an administrator account.
Room Scheduling System • Rendezvous by NFS Setup
).
1
Setting up a
79