Extron electronics TouchLink User Manual page 75

The Properties dialog box opens (see figure 78).
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
Figure 78. E-mail Address Displayed on the General Tab
6. If necessary, click the General tab (
displayed.
7. Note the room e-mail address shown (
only valid Exchange User ID for this room in the Room Scheduling System.
8. Click Cancel to exit the display (
9. Repeat steps 3 through 8 for each desired room.
Write down the UPNs of all rooms for setting up the Room Scheduling
TIP:
System.
). The general properties for the room are
1
). This value is the UPN, the value used as the
2
).
3
Room Scheduling System • Microsoft Extchange Setup
.
69