Mitsubishi Electric 800 Series Instruction Manual page 19

3.
In the "Setting Item" window, go to [Network Configuration Settings] then click
4.
Click [Connected/Disconnected Module Detection] in the "CC-Link IE TSN configuration" window.
5.
Read the cautions in the "Connected/Disconnected Module Detection" window and click [Execute].
6.
The FR-E800-E will appear on the screen when it is detected. Click [Close with Reflecting the Setting] to close the
window.
 System setting window
Communication speed setting of the master: 100 Mbps
1.
Select [Basic Settings] in the "Setting Item List" window.
2.
Set "5000.00 μs" or larger value for [Communication Period Interval Setting (Do not Set it in Units of 1us)].
3.
Set "200.00 μs" for [System Reservation Time].
4.
Set "Mixture of Authentication Class B/A or Authentication Class A Only" for [Authentication Class Setting].
18
2. Ethernet Communication
2.5 CC-Link IE TSN
next to the [Detailed Setting] field.