Mitsubishi Electric 800 Series Instruction Manual page 113

Bit
1 Forced Duplex Mode
2 to 15 —
• Capability Bits (Attribute 11)
Bit
0 Manual Setting Requires Reset
1 Auto-negotiate
2 Auto-MDIX
3 Manual Speed/Duplex
4 to 31 —
112
2. Ethernet Communication
2.11 EtherNet/IP
Name
Duplex mode when Auto-negotiate (Bit 0) = 0
0: Half duplex
1: Full duplex
Fixed to 0
Name
Attribute 6, change application condition
0: Immediately (Instance 3)
1: After reset (Instance 1, 2)
0: Not supported (Instance 3)
1: Not supported (Instance 1, 2)
Fixed to 0 (not supported)
Fixed to 1 (supported)
Fixed to 0
Description
Description