Mitsubishi Electric 800 Series Instruction Manual page 110

No. Name
7 Speed Actual
8 SpeedRef
9 Current Actual
11 Torque Actual
12 TorqueRef
15 Power Actual
17 Output Voltage
18 AccelTime
19 DecelTime
20 LowSpd Limit
21 HighSpd Limit
22 SpeedScale
23 Current Scale
24 Torque Scale
29 RefFromNet
*1 Writing is enabled only when the setting is the same as that of the inverter.
 TCP/IP Interface Object (F5h)
The object groups TCP/IP-related settings.
 Service
Class
Get_Attribute_Single
 Class attribute
No. Name
1 Revision
Access
Get INT
Set INT
Get INT
Get INT
Set INT
Get INT
Get INT
Set UINT
Set UINT
Set UINT
Set UINT
Set SINT
Set SINT
Set SINT
Get BOOL
Instance
Get_Attribute_All
Get_Attribute_Single
Set_Attribute_Single
Access
Get UINT
Type
Actual drive speed
SpeedScale
Unit: rpm / 2
Speed setting value
SpeedScale
Unit: rpm / 2
Select whether or not to use a sign for the frequency command
value using Pr.541.
Motor phase current
CurrentScale
Unit: 100mA / 2
Actual torque
TorqueScale
Unit: N·m / 2
Torque reference
TorqueScale
Unit: N·m / 2
Output power
PowerScale
Unit: W / 2
Output voltage
VoltageScale
Unit: V / 2
Acceleration time = Pr.7 (Pr.44) × Pr.18/Pr.20
Time from 0 to HighSpdLimit
Unit: ms
Deceleration time = Pr.8 (Pr.45) × Pr.18/Pr.20
Time from HighSpdLimit to 0
Unit: ms
Minimum speed limit
SpeedScale
Unit: rpm / 2
Maximum speed limit
SpeedScale
Unit: rpm / 2
Speed scaling factor
Current scaling factor
Torque scaling factor
Speed/torque command source monitoring
0: Local reference
1: Network reference
Type
0004h (Revision of the object)
Description
Description
2. Ethernet Communication
2.11 EtherNet/IP
1
2
3
4
5
6
7
8
9
10
109