Mitsubishi Electric 800 Series Instruction Manual page 13

NOTE
• Depending on the cable connector shape, the cable may not be connected to the inverter.
 Hubs
Use hubs that meet the following conditions. Operation is not guaranteed if the hubs do not meet these conditions.
• Compliance with the IEEE 802.3 (100BASE-TX)
• Support of the auto MDI/MDI-X function
• Support of the auto-negotiation function
• Switching hub (layer 2 switch)
*1 A repeater hub is not available.
Industrial switching hub
Model
NZ2EHG-T8N
NZ2EHG-T8 (discontinued product)
DT135TX
12
2. Ethernet Communication
2.2 Wiring
*1
Manufacturer
Mitsubishi Electric Corporation
Mitsubishi Electric Corporation
Mitsubishi Electric System & Service Co., Ltd.