Table of Contents
Advertisement
Before Mounting the Camera
CAUTION! Before mounting the camera make sure to copy the IP address
housing or on the camera packaging. You will need this address to configure the camera in the browser
later on (see
Camera Software in the Browser, p.
The MOBOTIX D71 has been designed for wall mounting. Using optional accessories, you can also install the
camera as follows:
n
For mounting on walls looking downwards, use the Wall Mount; see
46.
n
For mounting on poles, use the Corner/Pole Mount and the Wall Mount; see
/Pole Mount), p.
n
For mounting on corners of buildings, use the Corner/Pole Mount and the Wall Mount; see
a Corner (Corner/Pole Mount), p.
NOTE! Download the drilling template from the MOBOTIX website:
load Center > Marketing & Documentation > Drilling
CAUTION! Always print or copy the drilling template at 100% of the original size!
Before mounting the MOBOTIX D71, the following questions should be answered:
n
Where and how will the camera be mounted?
n
How is the mounting surface level?
Which other mounting options are available?
n
n
Which accessories might be needed?
n
How is the camera connected to the network and how is the power supplied?
n
How are the connections furnished from the building?
n
What cabling considerations are necessary?
n
Do you want to use a larger SD card (see
51.
48.
65).
www.mobotix.com > Support > Down-
Templates.
Replacing the microSD card, p.
Before Mounting the Camera
①
on the back of the camera
Mounting with the Wall Mount, p.
Mounting on a Pole (Corner-
70)?
Mounting
Mounting on
33 / 72
Advertisement
Table of Contents
