Optional Programming
[991] COS Additional Information
Description
Allows the following programming item to be changed, if required.
Bit 5: Enables or disables the Call Forwarding - Follow Me feature on a COS basis.
Other bits: Reserved.
16
15
Selection
• COS number: 1 through 8,
• Selection for bit 5: 0: disable/1: enable
Default
Bit 5: All COS – 1
Programming
1.
Enter 991.
Display: COS Add Inf.
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
Display example: 1111111111110000
4.
Keep pressing
5.
Enter your selection.
To change the current entry, press STORE and the new selection.
6.
To program another bit, repeat steps 4 and 5.
7.
Press STORE.
8.
To program another COS, press SELECT and the desired COS number.
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
To assign all COS numbers to one selection, press the
270
Display Example
14
13
12
11
10
or
to move the cursor to the desired bit.
Bit Number
9
8
7
6
( =all COS)
5
4
3
2
key at step 3.
Programming Guide
1