Table of Contents
Advertisement
General System Programming
1.1 General Programming Instructions
Default Setting
This system has a default factory setting. If any of the programming needs to be changed, you
will find the necessary information in "Features Guide." This makes the system very simple to
install and customise as required by the customer.
The default setting may vary according to the country of use. In this case, the default setting
for each country is listed as below.
G: Germany, SL: Switzerland, SW: Sweden, FL: Finland, NW: Norway, PR: Portugal,
DM: Denmark, BL: Belgium, JT: Italy
Please consult your dealer which model you are using if not listed.
Required Telephone Set
One of the following telephone sets is required for System Programming:
• Digital Proprietary Telephone (DPT):
KX-T7531, KX-T7533, KX-T7536, KX-T7230, KX-T7235
Extensions Used for Programming
Connect one of the above-mentioned telephone sets to either of the following:
• Jack number 1
• Jack programmed as a manager extension
To assign the manager extension, see Section [006] Operator/Manager Extension
Assignment — Day/Night"
• All jacks for Manager Programming [000] Date and Time Set through [014] Budget
Management on ISDN Port
8
Programming Guide
Advertisement
Table of Contents
