Table of Contents
Advertisement
[424] ISDN Configuration
Description
Assigns the configuration on ISDN port basis.
Selection
• Port number: 1 through 3
• Point/Multipoint
Default
Port 1, 2 — Point
Port 3 — Multipoint
Programming
1.
Enter 424.
Display: Access Mode
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #1 :Point
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• If 1 equipment is connected to the ISDN port, select "Point." If multiple equipment are
connected, select "Multipoint."
• To assign all ports to one selection, press the
the contents programmed for a first port.
• After this assignment, you should reset the system so that this assignment is effective.
Features Guide References
Integrated Services Digital Network (ISDN) Extension
Programming Guide
key at step 3. In this case, the display shows
CO Line Programming
157
Advertisement
Table of Contents
