Table of Contents
Advertisement
4.11
Option Programming
Description
Selection
Default
Programming
COS Additional Information
(1) Sets the number of digits allowed to dial out during an outside call
on a Class of Service (COS) basis. If an outside party hangs up and
the extension user tries to dial out still on the CO line, the system
will disconnects the line at the time the assigned digits are dialed.
This program can be added if CPC Signal Detection is not provided
by the CO.
The Field (1) shown below is used to enter your selection.
(2) Enables or disables the Call Forwarding – Follow Me feature on a
COS basis.
The Field (2) below is used to enter your selection.
Display
1111111111110000
example
Field number
• COS number: 1 through 8,
• Field number : 1 or 2
• Selection for field (1):
0000: no limit / 0001: 1 digit / 0010: 2 digits / 0011: 3 digits /
0100: 4 digits / 0101: 5 digits / 0110: 6 digits / 0111: 7 digits /
1000: 8 digits / 1001: 9 digits / 1010: 10 digits / 1011: 11 digits /
1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digits
• Selection for field (2): 0 : disable / 1 : enable
Field 1: All COS – 0000 / Field 2: All COS – 1
1.
Enter 991.
Display: COS Add Inf.
2.
Press NEXT.
Display: COS NO?->
3.
Enter a COS number.
Display example: 1111111111110000
4.
Keep pressing
field.
↓
(unused)
( =all COS)
or
to move the cursor to the desired
System Programming
991
↓
↓
(2)
(1)
4-143
Advertisement
Table of Contents
