Table of Contents
Advertisement
[631] CLIP/COLP Number Assignment for ISDN Port
Description
Assigns a CLIP/COLP number for each ISDN (BRI) port.
Selection
• Port number: 1 through 3
• BI (Business, CLIP)/PI (Private, CLIP)/BP (Business, COLP)/PP (Private, COLP)/AL
(All)
• CLIP/COLP number: 32 digits (max.)
Default
All ports — Not Stored
Programming
1.
Enter 631.
Display: CO CLIP/COLP
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #1:BI:
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press
6.
Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
7.
Press STORE.
8.
To program another port, press NEXT or PREV, or SELECT and enter the desired port
number.
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
• Each CLIP/COLP number consists of digits 0 through 9.
• To assign the same CLIP/COLP number to BI, PI, BP and PP, select "AL" in step 4.
• To assign all ports to one selection, press the
show the contents programmed for the first port.
Programming Guide
.
key in step 3. In this case, the display will
Extension Programming
235
Advertisement
Table of Contents
