Table of Contents
Advertisement
COS Programming
[520] Call Forwarding from Hunting Group
Description
Enables or disables to perform the Call Forwarding from Hunting Group on a Class of Service
(COS) basis. Calls arriving at any Hunting Groups ("All") or just calls arriving at your Hunting
Group ("Connected") can be forwarded to your extension.
Selection
• COS number: 1 through 8
• Disable/Connect/All
Default
All COS — Disable
Programming
1.
Enter 520.
Display: Hunt Group FWD
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Features Guide References
Call Forwarding — from Hunting Group
198
key at step 3. In this case, the display shows the
Programming Guide
Advertisement
Table of Contents
