Table of Contents
Advertisement
To change the current entry, press CLEAR and enter the new message.
5.
Press STORE.
6.
To program another message, press NEXT or PREV, or SELECT and the desired message
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 9 messages. Messages 1 through 6 are programmed at the factory
but can be changed. Each message has a maximum of 16 characters.
• You can enter a maximum of 7 "%" characters per message which can be programmed at
each user's station. The station user can enter 0 through 9,
If the user enters digits less than the number of "%" characters, it is recommended to fill the
remaining "%" characters with "#" or " ".
• If there are 4-digit extension numbers available in your system, add 1 % to Message 3.
• To display parts of the message which have scrolled off the display, press
Features Guide References
Absent Message Capability
Programming Guide
Manager Programming
and # for the "%" characters.
or
.
43
Advertisement
Table of Contents
