Table of Contents
Advertisement
FWD VM BT — 7; FWD EXT RBT — 8
Programming
1.
Enter 113.
Display: VM Status Set
2.
Press NEXT to program ringback tone status.
To program another status, keep pressing NEXT or PREV until the desired status is
displayed.
Display example: RBT
3.
Enter a DTMF signal number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
4.
Press STORE.
5.
To program another selection, keep pressing NEXT or PREV until the desired selection is
displayed.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• A DTMF signal number can have a maximum of 3 digits, consisting of 0 through 9, , #
and PAUSE.
• The DTMF signals are sent to the extensions in the extension groups that are assigned as
"Voice Mail" or "Automated Attendant" in programme [106] Station Hunting Type.
Features Guide References
Voice Mail Integration
Programming Guide
:1
System Programming
79
Advertisement
Table of Contents
