Cos Additional Information - Panasonic KX-TD308 Installation Manual

4.10 Optional Programming
Description
Field number
Selection
Default
Programming

COS Additional Information

(1) Sets the number of digits allowed to dial out during an outside call
on a Class of Service (COS) basis. If an outside party hangs up and
the extension user tries to dial out still on the outside line, the
system will disconnect the line at the time the assigned number of
digits are dialed. This program can be added if the Calling Party
Control (CPC) Signal Detection is not provided by the outside line.
The Field (1) shown below is used to enter your selection.
(2) Enables or disables Call Forwarding – Follow Me feature on a COS
basis.
The Field (2) below is used to enter your selection.
Display
1111111111110000
example
• COS number: 1 through 8,
• Field number : 1 or 2
• Selection for field (1):
0000: no limit / 0001: 1 digit / 0010: 2 digits / 0011: 3 digits /
0100: 4 digits / 0101: 5 digits / 0110: 6 digits / 0111: 7 digits /
1000: 8 digits / 1001: 9 digits / 1010: 10 digits / 1011: 11 digits /
1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digits
• Selection for field (2): 0 : disable / 1 : enable
Field 1: All COS – 0000 / Field 2: All COS – 1
1. Enter 991.
Display: 991 COS ADD DATA
2. Press NEXT.
Display: COS NO?
3. Enter a COS number.
Display example: 1111111111110000
4. Keep pressing
field.
(unused)
( =all COS)
or to move the cursor to the desired
System Programming
991
(2) (1)
4-151