10.
Press STORE.
11.
Press NEXT.
Display example: 00:00
12.
Enter the hour.
To change the current entry, press CLEAR and the new hour.
13.
Press
14.
Enter the minute.
To change the current entry, press CLEAR and new minute.
15.
Press STORE.
16.
Press END.
Conditions
• After changing an entry, you can press STORE. You do not have to perform all of the rest
of the steps.
• To go back to the previous field, press
• If you hear an alarm after pressing STORE, check that the date is valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave the entry empty.
• The date and time are adjusted automatically, when the first outgoing call is made through
ISDN line after 3 o'clock each morning.
Features Guide References
Automatic Adjust Time
Display, Time and Date
Programming Guide
.
at steps 4 through 9 and steps 13 through 14.
Manager Programming
25