Table of Contents
Advertisement
CO Line Programming
[425] ISDN Data Link Mode
Description
Assigns the data link mode on ISDN port basis.
Selection
• Port number: 1-3
• Permanent/Call
Default
Port 1, 2 — Permanent
Port 3 — Call
Programming
1.
Enter 425.
Display: Data Link Mode
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #1 :Permanent
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another port number, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all ports to one selection, press the
the contents programmed for a first port.
• After this assignment, you should reset the system so that this assignment is effective.
Features Guide References
Integrated Services Digital Network (ISDN) Extension
158
key at step 3. In this case, the display shows
Programming Guide
Advertisement
Table of Contents
