Table of Contents
Advertisement
[512] External Relay Access
Description
Enables or disables to turn on the external relay on a Class of Service (COS) basis.
Selection
• COS number: 1 through 8
• Enable/Disable
Default
All COS — Enable
Programming
1.
Enter 512.
Display: External Relay
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Features Guide References
External Relay
Programming Guide
key at step 3. In this case, the display shows the
COS Programming
191
Advertisement
Table of Contents
