Cos Additional Information - Panasonic KX-TD1232JT Programming Manual

[991] COS Additional Information

Description
1.
Sets the number of digits allowed to dial out during an analogue outside call on a Class of
Service (COS) basis. If an outside party hangs up and the extension user tries to dial out still
on the outside line, the system will disconnect the line at the time the assigned number of
digits are dialled.
This programme is effective if the Calling Party Control (CPC) Signal Detection is not
provided by the outside line.
The bits 4, 3, 2 and 1 shown below is used to enter your selection.
2.
Enables or disables Call Forwarding – Follow Me feature on a COS basis.
The bit 5 below is used to enter your selection.
16 15
Selection
• COS number: 1 through 8,
• Selection for bits 4, 3, 2 and 1:
0000: no limit / 0001:1 digit / 0010: 2 digits / 0011: 3 digits / 0100: 4 digits / 0101: 5 digits
/ 0110: 6 digits / 0111: 7 digits / 1000: 8 digits / 1001: 9 digits / 1010: 10 digits /
1011: 11 digits / 1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digits
• Selection for bit 5: 0: disable / 1: enable
Default
Bits 4, 3, 2 and 1: All COS – 0000 / Bit 5: All COS – 1
Programming
1.
Enter 991.
Display: COS Add Inf.
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
Display example: 1111111111110000
4.
Keep pressing
General Programming
Display Example
14 13 12 11 10
unused
or to move the cursor to the desired bit.
Bit Number
9 8 7 6
( =all COS)
2.9 Optional Programming
5 4 3 2 1
2 1
219