System Programming
[105] Account Codes
Description
Assigns the account codes for Account Code Entry, Verified – All Calls and Verified – Toll
Restriction Override modes. If Verified – All Calls is assigned in programme [508] Account
Code Entry Mode, an account code is required to make an outside call. If Verified – Toll
Restriction Override is assigned, an account code is only required for a toll call and overrides
toll restriction.
Selection
• Location number: 01 through 64
• Account code: 10 digits (max.)
Default
All locations — Not Stored
Programming
1.
Enter 105.
Display: Account Code
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 01, you can also press NEXT
Display example: 01 :Not Stored
4.
Enter an account code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new account code.
5.
Press STORE.
6.
To program another location, press NEXT or PREV, or SELECT and the desired location
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 64 verifiable account codes. Each code has a maximum of 10 digits,
consisting of 0 through 9.
• Programme [508] Account Code Entry Mode is used to select the Account Code Entry
mode.
70
Programming Guide