Table of Contents
Advertisement
COS Programming
7.1 COS Programming
[500-501] Toll Restriction Level — Day/Night
Description
Each extension must be assigned a Class of Service (COS). These programmes set the toll
restriction value for each COS in day or night mode.
Selection
• COS number: 1 through 8
• Level number: 1 through 8
Default
All COS — Level 1 — Day/Night
Programming
1.
Enter a programme address (500 for day or 501 for night).
Display example: TRS Level Day
2.
Press NEXT.
Display : COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:1
4.
Enter a level number.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Features Guide References
Day/Night Service
180
key at step 3. In this case, the display shows the
Programming Guide
Advertisement
Table of Contents
