Table of Contents
Advertisement
Manager Programming
8 04 (COLR)
8 05 (DND for ICH1:1)
8 06 (Executive Busy Override Deny)
8 07 (Paging Deny)
8 08 (Paralleled Telephone Connection)
8 09 (Pickup Dialling)
8 10 (Call Forwarding from Hunting
Group)
8 11 (Doorphone Call Forwarding to CO
Line)
8# (One-Touch Dialling with Auto Hold)
9 (Terminate)
(Loop-CO)
CO (ringer frequency)
*1 FENOH: Floating Extension Number of Hunting Group
*2 Available when the Digital Super Hybrid System is connected to a Digital Proprietary
Telephone capable Panasonic Voice Processing System (one that supports digital proprietary
telephone integration).
*3 Press CO button twice.
Default
All Jacks — CO buttons 1 through 6 = Single-CO 01 through 06; Ring tone type 2
Other CO Buttons = Not Stored
Programming
1.
Enter 005.
Display: Flexible Key Asn
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 1, you can also press NEXT.
Display: PT-PGM Mode
4.
Press the CO button to be changed.
The display shows the contents pre-assigned to the button.
Display example: CO-01
36
Button Code
*3
Parameter
None
None
None
None
None
None
2 through 4 digits (FENOH)
1 through 3 (Doorphone number)
24 digits max. (Telephone number)
None
None
1 through 8 (Ring tone type number)
*1
Programming Guide
Advertisement
Table of Contents
