Table of Contents
Advertisement
[003] Extension Number Set
Description
Assigns an extension number to each jack.
Note
This programming should be performed before you connect a Panasonic Voice Processing
System (VPS) because the VPS can create mailboxes automatically based on your extension
plan (extension number set).
Selection
• Jack number: 1-4 (-1/-2), 5-8 (-1)
• Extension Number: 2 through 4 digits
Default
DPT extensions :
Jack 1-1 : 201/Jack 2-1 : 202/Jack 3-1 : 203/Jack 4-1 : 204/Jack 5-1 : 205/Jack 6-1 : 206 /Jack
7-1 : 207/Jack 8-1 : 208
XDP extensions :
Jack 1-2 : 301/Jack 2-2 : 302/Jack 3-2 : 303/Jack 4-2 : 304
Programming
1.
Enter 003.
Display: EXT Number Set
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display: #1-1:EXT201
4.
Enter an extension number.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Programming Guide
(-1 = first part, -2 = second part)
Manager Programming
31
Advertisement
Table of Contents
