Table of Contents
Advertisement
Transmissible Document
The unit can transmit documents with the following sizes,
weights and textures.
•Original width is
128 mm (5") to 216 mm {
8
V
2
").
• Effective width is
up to 208 mm (
83
/is").
•Weight of transmissible document is
12 to
24 pounds
when sending each page separately.
Maximum size of original
216 mm
(8V2")
Minimum size of original
128 mm
(5")
■ Automatic Document Feeder:
•Up to 5 pages at the same time
•Bond paper (16 to 20 pounds)
•Letter size
• Paper with an uncoated surface
•When you are transmitting a narrow document, slide
the right document guide over to support the
document.
NOTES:
•A document which is over 600 mm (235/a") cannot
be transmitted. This will be indicated by the
lighting of the ALARM indicator and the sounding
of the alarm for 1 second.
•If the originals are electrostatically charged, the
automatic document feeder may not function
properly.
• In case of malfunction of the automatic document
feeder, try to send each page separately.
Information on Originals
The following documents should first be copied
on a
copier machine, and
the copy used as the fax
document. Or use the exclusive carrier
sheet included
with your unit.
• Paper with chemically treated surfaces such as carbon-
blacked paper or carbonless duplicating paper
•Heavily curled, creased or torn paper
•Paper with a coated surface
•Small size paper such as a slip or voucher
•Thin paper (less than 12 pounds)
•Wet paper with ink or paste
•Document which has staples or clips
•Make the copy using a copier machine to transmit a
legible document in the following cases:
•Thick paper (over 24 pounds), since a carrier sheet
cannot be used.
•When the contrast between the printed letter and the
background is small.
•When the letters printed on the back side can be seen
from the front of the paper, (e.g. newspaper)
How to Use the Carrier Sheet
Paper feed direction
Transparent
cover
1. Place the original into the carrier sheet with the print
facing the transparent cover.
2. Place the transparent cover over the original.
3. Place the carrier sheet face down against the
DOCUMENT guide and insert it onto the DOCUMENT
holder until it stops.
1-4
Advertisement
Table of Contents
