Table of Contents
Advertisement
System Programming
[132] Hunting Group Name Assignment
Description
Assigns a hunting group name to the hunting group. When an incoming outside call is received,
the assigned name and the extension number of the group are displayed on the LCD.
Selection
• Hunting group number: 01 through 32
• Name: 16 characters (max.)
Default
All hunting groups — Not Stored
Programming
1.
Enter 132.
Display: Hunt Group Name
2.
Press NEXT.
Display: Group NO?
3.
Enter a hunting group number.
To enter hunting group number 01, you can also press NEXT.
Display example: 01:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5.
Press STORE.
6.
To program another group, press NEXT or PREV, or SELECT and the desired hunting
group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
None
Features Guide References
Hunting Group
Station Hunting
102
Programming Guide
Advertisement
Table of Contents
