Table of Contents
Advertisement
CO Line Programming
6.1 CO Line Programming
[400] CO Port Connection Assignment
Description
Used to identify the CO ports which are connected to the system. This prevents users from
originating a call to a line which is not connected.
Selection
• CO port number: 1 through 3
• Connect/No Connect
Default
All CO ports — Connect
Programming
1.
Enter 400.
Display: CO Connection
2.
Press NEXT.
Display: Port NO?
3.
Enter a CO line number.
To enter CO line number 1, you can also press NEXT.
Display example: #1 :Connect
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another CO port, press NEXT or PREV, or SELECT and the desired CO port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all CO port to one selection, press the
shows the contents programmed for CO1.
Features Guide References
None
148
key at step 3. In this case, the display
Programming Guide
Advertisement
Table of Contents
