Table of Contents
Advertisement
Programming
1.
Enter 100.
Display: FLX Numbering
2.
Press NEXT.
Display: Select NO?
3.
Enter a selection number.
To enter selection number 01, you can also press NEXT.
Display example: 01. 1-EXT BL:2
4.
Enter the feature number.
To delete the feature number, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another selection, press NEXT or PREV, or SELECT and the desired
selection number.
7.
Repeat steps 4 through 6.
8.
Press END.
To remove all the feature numbers except selection numbers (01) through (16) 1st
through 16th extension blocks;
1.
Enter 100.
2.
Press NEXT.
3.
Enter 00.
Display: All Feature CLR?
4.
Press STORE.
5.
Press END.
Conditions
• Each extension block has 1 or 2 digits, consisting of 0 through 9. Assign the leading digits
for extension numbers of the respective blocks.
• Assignment of extension blocks defines the limits for programmes [003] Extension
Number Set, [012] ISDN Extension Number Set, [127] Voice Mail Extension Number
Assignment, [130] Phantom Extension Number Assignment and [813] Floating
Number Assignment.
• To clear an extension block (01) through (16), it is required to change the corresponding
numbers assigned in programmes [003] Extension Number Set, [012] ISDN Extension
Number Set, [127] Voice Mail Extension Number Assignment, [130] Phantom
Extension Number Assignment and [813] Floating Number Assignment.
• Each feature number has 1 through 3 digits, consisting of 0 through 9, , and #.
• If
or # is included in a feature number, dial pulse telephone users cannot access the
feature.
Programming Guide
System Programming
63
Advertisement
Table of Contents
