Table of Contents
Advertisement
5.
Enter a button code (plus parameter, if required).
To change the parameter, press CLEAR and enter the new parameter.
6.
Press STORE.
7.
To program another CO button of the same jack, repeat steps 4 through 6.
To program another jack, press SELECT and repeat steps 3 through 6.
8.
Press END.
Cancelling
1.
Perform the same procedures as steps 1 through 4 above.
2.
Enter 2.
3.
Press STORE.
4.
Press END.
Conditions
• A maximum of 24 CO buttons/PF keys can be assigned.
• A centralised telephone is a telephone connected to jack 1 or a jack programmed as a
manager extension in programme [006] Operator/Manager Extension Assignment —
Day/Night.
• If you press the same CO button again at step 5, you can select a desired ringer frequency
for the CO button from 8 types of ring tone. When you enter the tone type number (1
through 8), you will hear the selected tone type before STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO or Loop-CO.
Features Guide References
Button, Flexible
Buttons on Digital Proprietary Telephones
Programming Guide
Manager Programming
37
Advertisement
Table of Contents
