COS Programming
[505] Executive Busy Override
Description
Determines which Classes of Services (COS) are allowed to perform Executive Busy Override
– CO Line/Extension. Executive Busy Override allows the user to intrude into an established
call.
Selection
• COS number: 1 through 8
• Enable/Disable
Default
All COS — Disable
Programming
1.
Enter 505.
Display: Busy Override
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Features Guide References
Executive Busy Override — CO Line
Executive Busy Override — Extension
184
key at step 3. In this case, the display shows the
Programming Guide