Table of Contents
Advertisement
Manager Programming
[001] System Speed Dialling and Intelligent Call Handling Number
Set
Description
Used to program the System Speed Dial numbers and Intelligent Call Handling number (CLIP
/DDI/MSN). These numbers are available to all extension users. The stored numbers are also
applied to Calling/Connected Line Identification Presentation (CLIP/COLP) and Call Log,
Incoming Features.
Selection
• Speed dial number: 000 through 499 (CLIP: 000-499)
DDI/MSN number: 500 through 699 (DDI/MSN: 500-699)
• Telephone number: 32 digits (max.)
Default
All speed dial numbers — Not Stored
Programming
1.
Enter 001.
Display: SPD & CH Number
2.
Press NEXT.
Display: SPD&CH Cod?
3.
Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000:Not Stored
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another speed dial number, press NEXT or PREV, or SELECT and the desired
speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Be sure to assign all DDI/MSN numbers at the DDI/MSN locations 500 through 699.
Otherwise, calls from persons whose CLIP is not registered in locations 000 through 499
will not be received.
26
Programming Guide
Advertisement
Table of Contents
