Clip / Colp Number Assignment For Isdn Extension - Panasonic KX-TD816CE Installation Manual

4.8 Extension Programming

CLIP / COLP Number Assignment for ISDN Extension

Description
Selection
Default
Programming
Conditions
Feature Reference
Assigns a CLIP/COLP number for an ISDN extension.
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ISDN ports)
• CLIP/COLP number: 16 digits max.
All ports – Not stored
1. Enter 618.
Display: CLIP for I-EXT
2. Press NEXT.
Display: Port NO? →
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Not Stored
4. Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another port, press NEXT or PREV, or SELECT
and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
• A CLIP/COLP number consists of a maximum of sixteen digits, 0
through 9.
• For the KX-TD1232, port numbers 01 through 06 are for the Master
System and 07 through 12 are for the Slave, if available.
• To assign all ISDN ports to the same number, press the
In this case, the display will show the contents programmed for
Port 01.
Section 3, Features
Added and Changed Features for the Installation Manual and Programming Tables
Calling Line Identification Restriction (CLIR)
In this manual
Calling / Connected Line Identification Presentation (CLIP / COLP)
Connected Line Identification Restriction (COLR)
618
key in step 3.
43