Table of Contents
Advertisement
12
5.3
Visualization Interface
The DisplayWRF06 visualization shows, for example, how the output values of
the room operating unit can be displayed. Options have also been implemented in
the visualization to change input values.
The visualization makes it possible to read the output values for temperature, set
point 1 and current controller mode. In addition, the states of the buttons on the
room operating unit are also displayed. The required set point 1 can be entered in
the Input Set point 1 field. The [Enable] button is used to switch on the
respective Slave function block. The input values are transferred to the respective
room operating unit by pressing the [Refresh Slave] button. The [Alarm Message
1] button is used to switch on a previously defined (in the configuration) alarm
message.
Figure 4: Visualization Interface for Testing the Functions
Table of Contents
Anwendungshinweis
Advertisement
Chapters
Table of Contents
