Enclosure Weights - Danfoss VLT HVAC Drive FC 102 Design Manual

Specifications
Control card performance
Scan interval
Control card, USB serial communication
USB standard
USB plug
NOTICE
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from ground. Use only isolated laptop/PC as connection to the USB
connector on the drive or an isolated USB cable/converter.

7.8 Enclosure Weights

Enclosure
E1
E2
7 7
Table 7.13 Enclosure E1–E2 Weights, kg (lb)
Enclosure
F1
F2
F3
F4
F8
F9
F10
F11
F12
F13
Table 7.14 Enclosure F1–F13 Weights, kg (lb)
64
®
VLT HVAC Drive FC 102
380–480/500 V
270–313 kg (595–690 lb)
234–277 kg (516–611 lb)
380–480/500 V
1017 kg (2242.1 lb)
1260 kg (2777.9 lb)
1318 kg (2905.7 lb)
1561 kg (3441.5 lb)
447 kg (985.5 lb)
669 kg (1474.9 lb)
893 kg (1968.8 lb)
1116 kg (2460.4 lb)
1037 kg (2286.4 lb)
1259 kg (2775.7 lb)
Danfoss A/S © 11/2017 All rights reserved.
1.1 (full speed)
USB type B device plug
525–690 V
263–313 kg (580–690 lb)
221–277 kg (487–611 lb)
525–690 V
1017 kg (2242.1 lb)
1260 kg (2777.9 lb)
1318 kg (2905.7 lb)
1561 kg (3441.5 lb)
447 kg (985.5 lb)
669 kg (1474.9 lb)
893 kg (1968.8 lb)
1116 kg (2460.4 lb)
1037 kg (2286.4 lb)
1259 kg (2775.7 lb)
MG16C302
5 M/S