Enclosure Weights - Danfoss VLT AQUA Drive FC 202 Design Manual

Specifications
Speed accuracy (open loop)
All control characteristics are based on a 4-pole asynchronous motor.
Control card performance
Scan interval
Control card, USB serial communication
USB standard
USB plug
NOTICE!
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from ground. Use only isolated laptop/PC as connection to the USB
connector on the drive or an isolated USB cable/converter.
7 7

7.8 Enclosure Weights

Enclosure
D1h
D2h
D3h
D4h
D5h
D6h
D7h
D8h
Table 7.12 Enclosure D1h–D8h Weights, kg (lb)
1) With optional load share and regen terminals.
Enclosure
E1h
E2h
E3h
E4h
Table 7.13 Enclosure E1h–E4h Weights, kg (lb)
56
®
VLT AQUA Drive FC 202
380–480/500 V
62 (137)
125 (276)
62 (137)
108 (238) 1)
125 (276)
1)
179 (395)
99 (218)
128 (282)
185 (408)
232 (512)
380–480/500 V
295 (650)
318 (700)
272 (600)
295 (650)
Danfoss A/S © 01/2018 All rights reserved.
30–4000 RPM: Maximum error of ±8 RPM
1.1 (full speed)
USB type B device plug
525–690 V
62 (137)
125 (276)
62 (137)
108 (238) 1)
125 (276)
1)
179 (395)
99 (218)
128 (282)
185 (408)
232 (512)
525–690 V
295 (650)
318 (700)
272 (600)
295 (650)
5 M/S
MG22B222