Enclosure Weights - Danfoss VLT AutomationDrive FC 361 Series Design Manual

Specifications
Control card, USB serial communication
USB standard
USB plug
NOTICE
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from ground. Use only isolated laptop/PC as connection to the USB
connector on the drive or an isolated USB cable/converter.

5.7 Enclosure Weights

5 5
Enclosure
J8
J9
Table 5.3 Enclosure J8–J9 Weights, kg (lb)
22
VLT® AutomationDrive FC 361
Danfoss A/S © 03/2019 All rights reserved.
380–480 V
98 (216)
164 (362)
1.1 (full speed)
USB type B device plug
MG06K102