Danfoss VLT HVAC Drive FC 102 Design Manual page 224

How to Order a Drive
Type
IP20 conversion, E2
Back-channel cooling kits
In back/out back, E1
In back/out back, E2
In back/out back, F1–F13
In bottom/out top, E2
Out top, E2
LCP
LCP 101
LCP 102
LCP cable
LCP kit, IP21
LCP kit, IP21
LCP kit, IP21
Table 13.8 Kits Available for Enclosures E1–E2 and F1–F13
13.2.4 Ordering Numbers for A Options: Fieldbuses
Description
13 13
®
VLT PROFIBUS DP MCA 101
®
VLT DeviceNet MCA 104
®
VLT LonWorks MCA 108
®
VLT BACnet MCA 109
®
VLT PROFINET MCA 120
®
VLT EtherNet/IP MCA 121
®
VLT Modbus TCP MCA 122
®
VLT Powerlink MCA 123
®
VLT VACnet/IP MCA 125
Table 13.9 Ordering Numbers for A Options
For information on fieldbus and application option compatibility with older software versions, contact the Danfoss supplier.
222
®
VLT HVAC Drive FC 102
Description
Provides the drive with an ingress protection rating of IP20/Protected
Chassis. Only for E2 enclosure.
Allows the cooling air to be directed in and out through the back of
the drive. Kit includes top and base covers for an E1 with protection
rating of IP21/54 (Type1/12).
Allows the cooling air to be directed in and out through the back of
the drive. Kit includes top and base covers for an E2 with a protection
rating of IP00 (Chassis).
Allows the cooling air to be directed in and out through the back of
the drive. Plates are already included on drive. Contact factory for
installation instructions.
Allows the cooling air to be directed in through the bottom and out
through the top of the drive. This kit used only for enclosure E2.
Allows the cooling air to be directed out through the top of the drive.
This kit used only for enclosure E2.
Numerical local control panel (NLCP)
Graphical local control panel (GLCP)
Separate LCP cable, 3 m (9 ft)
Panel mounting kit including graphical LCP, fasteners, 3 m (9 ft) cable,
and gasket
Panel mounting kit including numerical LCP, fasteners, and gasket
Panel mounting kit for all LCPs including fasteners, 3 m (9 ft) cable,
and gasket
Danfoss A/S © 11/2017 All rights reserved.
Ordering number
176F1884
176F1946
Welded enclosure – 176F1861
Rittal enclosure – 176F1783
Contact factory
2000 mm (78.7 in) cabinet –
176F1850
2200 mm (86.6 in) cabinet –
176F0299
176F1776
130B1124
130B1107
175Z0929
130B1113
130B1114
130B1117
Ordering number
Uncoated Coated
130B1100 130B1200
130B1102 130B1202
130B1106 130B1206
130B1144 130B1244
130B1135 130B1235
130B1119 130B1219
130B1196 130B1296
130B1489 130B1490
– 130B1586
MG16C302