4 Safety
4.1 Basic safety information
12
Operating Instructions (valid for Canada) CEREC AF, CEREC AF Connect
4.1.4
Transporting the camera
CAUTION
Trip/fall hazard
When transporting the camera, be aware that you might trip over the
cable and fall. This is particularly the case if the 50cm camera extension
cable is used.
➢ When transporting the camera, please ensure that the free cable
ends are coiled.
The camera can be detached from the storage cradle for use in treatment
rooms.
4.1.5
Stability of the unit
NOTICE
The CEREC AF/CEREC AF Connect unit could slip and fall off the table
Please ensure that you place the cradle and camera on a flat surface.
The round plate upon which the cradle is mounted is equipped with non-
slip feet to prevent movement.
4.1.6
Maintenance and repair
As manufacturers of dental instruments and laboratory equipment, we
can assume responsibility for the safety properties of the unit only if the
following points are observed:
● The maintenance and repair of this unit may be performed only by
Dentsply Sirona or by agencies authorized by Dentsply Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
4.1.7
Modifications to the product
Modifications to this product which may affect the safety of the operator,
patients or third parties are prohibited by law!
4.1.8
Accessories
In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories expressly
approved by Dentsply Sirona. The user is responsible for any damage
resulting from the use of non-approved accessories.
Dentsply Sirona
66 37 487 D3652
D3652.201.01.14.02 10.2017