Port Settings; Captive Portal - peplink PEPWAVE MAX BR2 Pro User Manual

Enable
DHCP Server IP
Address
DHCP Option 82
Once DHCP is set up, configure LAN Physical Settings, Static Route Settings, WINS
Server Settings, and DNS Proxy Settings as noted above.
8.2

Port Settings

To configure port settings, navigate to Network > Port Settings
On this screen, you can enable specific ports, as well as determine the speed of the LAN
ports, whether each port is a trunk or access port, can well as which VLAN each link belongs
to, if any.
8.3

Captive Portal

The captive portal serves as a gateway that clients have to pass if they wish to access the
internet using your router. To configure, navigate to Network>LAN>Captive Portal.
https://www.peplink.com
DHCP Relay Settings
Check this box to turn on DHCP relay. Click the
Enter the IP addresses of one or two DHCP servers in the provided fields. The
DHCP servers entered here will receive relayed DHCP requests from the LAN. For
active-passive DHCP server configurations, enter active and passive DHCP server
relay IP addresses in DHCP Server 1 and DHCP Server 2.
DHCP Option 82 includes device information as relay agent for the attached client
when forwarding DHCP requests from client to server. This option also embeds
the device's MAC address and network name in circuit and remote IDs. Check this
box to enable DHCP Option 82.
icon to disable DHCP relay.
32 Copyright @ 2019 Pepwave