Inbound Access; Definition Of Port Forwarding - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series
15

Inbound Access

Inbound access is also known as inbound port address translation. On NAT WAN connection, all inbound
traffic to the server behind the Peplink unit requires inbound access rules.
By the custom definition of servers and services for inbound access,Internet users can access the servers
behind PeplinkBalance. Advanced configurations allow inbound access to be distributed among multiple
servers on the LAN.
Inbound access applies only to WAN connections that operate inNAT mode. For WAN connections that operate
inDrop-in mode or IP forwarding, inbound traffic is forwarded to the LAN by default.

15.1 Definition of Port Forwarding

(Available onthe Peplink Balance 20/30/30 LTE)
Inbound port forwarding rules are defined atNetwork > Inbound Access >Port Forwarding.
To define a new service, click the Add Service button
This setting specifies whether the inbound service takes effect.When Enable is checked, the
inbound service takes effect: traffic is matched and actions are taken by the Peplink Balance
Enable
based on the other parameters of the rule.When this setting is disabled, the inbound service
does not take effect: the Peplink Balance disregards the other parameters of the rule.
This setting identifies the service to the system administrator.Valid values for this setting consist
Service Name
of only alphanumeric and underscore "_" characters.
http://www.peplink.com
Important Note
Port Forwarding Settings
-110 / 227 -
.The followingscreen is displayed:
Copyright © 2014 Peplink